CLICK HERE FOR THE BEST PRICED CELL PHONE PLANS IN THE WORLD

Wireless Phone Services

 

Cellular Access Technologies: CDMA
CDMA takes an entirely different approach from TDMA. CDMA, after digitizing data, spreads it out over the entire available bandwidth. Multiple calls are overlaid on each other on the channel, with each assigned a unique sequence code. CDMA is a form of spread spectrum, which simply means that data is sent in small pieces over a number of the discrete frequencies available for use at any time in the specified range.

 
In CDMA, each phone’s data has a unique code.

All of the users transmit in the same wide-band chunk of spectrum. Each user’s signal is spread over the entire bandwidth by a unique spreading code. At the receiver, that same unique code is used to recover the signal. Because CDMA systems need to put an accurate time-stamp on each piece of a signal, it references the GPS system for this information. Between eight and 10 separate calls can be carried in the same channel space as one analog AMPS call. CDMA technology is the basis for Interim Standard 95 (IS-95) and operates in both the 800-MHz and 1900-MHz frequency bands.

Ideally, TDMA and CDMA are transparent to each other. In practice, high-power CDMA signals raise the noise floor for TDMA receivers, and high-power TDMA signals can cause overloading and jamming of CDMA receivers.

In the next section, you’ll learn about the difference between cellular and PCS services.

 

Copyright   CellPhone-Plans.net   *   Contact   *    SiteMap   *    Home

 

CLOSE
CLOSE
0Shares